• MIK-LDG-C Electromagnetic flow meter

    MIK-LDG-C Electromagnetic flow meter

    High accuracy magnetic flowmeter. Special flow meter for chemical and pharmaceutical industry. The latest models in 2021 Features

    • Pipe diameter: DN15~DN1000
    • Accuracy: ±0.5%(Flow speed > 1m/s)
    • Reliably:0.15%
    • Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
    • Turndown ratio: 1:100

    Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com

  • MIK-LDG Remote type electromagnetic flowmeter

    MIK-LDG Remote type electromagnetic flowmeter

    Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.

    Features

    • Accuracy:±0.5%(Flow speed > 1m/s)
    • Reliably:0.15%
    • Electric conductivity: Water: Min. 20μS/cm

    Other liquid:Min.5μS/cm

    • Flange:ANSI/JIS/DIN DN15…1000
    • Ingress protection:IP68
  • MIK-LDG Sanitary electromagnetic flowmeter for food processing

    MIK-LDG Sanitary electromagnetic flowmeter for food processing

    SUP-LDG Sanitary electromagnetic flowmeter is made of stainless steel, which is widely used in water supply, waterworks, food processing, etc. It supports pulse, 4-20mA or RS485 communication signal output.

    Features

    • Accuracy:±0.5%(Flow speed > 1m/s)
    • Reliably:0.15%
    • Electric conductivity: Water: Min. 20μS/cm

    Other liquid:Min.5μS/cm

    • Flange:ANSI/JIS/DIN DN15…1000
    • Ingress protection:IP65

    Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com

  • MIK-LDG Stainless steel body electromagnetic flowmeter

    MIK-LDG Stainless steel body electromagnetic flowmeter

    Magnetic flowmeters operate under the principle of Faraday’s Law of Electromagnetic Induction to measure liquid velocity. Following Faraday’s Law, magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. In order of usage, magnetic flowmeter use in water/wastewater industry, chemical, food and beverage, power, pulp and paper, metals and mining, and pharmaceutical application. Features

    • Accuracy:±0.5%,±2mm/s(flowrate<1m/s)
    • Electric conductivity: Water: Min. 20μS/cm

    Other liquid:Min.5μS/cm

    • Flange:ANSI/JIS/DIN DN10…600
    • Ingress protection:IP65
  • MIK-LDG Carbon steel body electromagnetic flow meter

    MIK-LDG Carbon steel body electromagnetic flow meter

    SUP-LDG electromagnetic flow meter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. Features

    • Pipe diameter: DN15~DN1000
    • Accuracy: ±0.5%(Flow speed > 1m/s)
    • Reliability:0.15%
    • Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
    • Turndown ratio: 1:100
    • Power supply:100-240VAC,50/60Hz; 22-26VDC
  • MIK-LDGR Electromagnetic BTU meter

    MIK-LDGR Electromagnetic BTU meter

    Sinomeasure electromagnetic BTU meters accurately measure the thermal energy consumed by chilled water in British thermal units (BTU), which is a basic indicator for measuring thermal energy in commercial and residential buildings. BTU meters are usually used in commercial and industrial as well as office buildings for chilled water systems, HVAC, heating systems, etc. Features

    • Accuracy:±2.5%
    • Electric conductivity:>50μS/cm
    • Flange:DN15…1000
    • Ingress protection:IP65/ IP68
  • MIK-LDG Magnetic Type Flow Meter

    MIK-LDG Magnetic Type Flow Meter

    Magnetic type flow meter, also known as electromagnetic flow meter, is a device used to measure the flow rate of liquids in a pipeline. It operates on the principle of Faraday’s law of electromagnetic induction, where a conductive fluid passing through a magnetic field generates a voltage proportional to its velocity. This voltage is then measured by the flow meter and converted into a flow rate reading. Magnetic type flow meters are highly accurate, have no moving parts, and can measure a wide range of fluid types, including corrosive and abrasive fluids. They are commonly used in industries such as water treatment, chemical processing, and food and beverage production.

  • Magnetic flow transmitter

    Magnetic flow transmitter

    Electromagnetic flow transmitter adopts LCD indicator and “simple setting” parameters to improve the convenience of maintenance. The flow sensor diameter, lining material, electrode material, flow coefficient can be revised, and the intelligent diagnosis function significantly improves the applicability of the flow transmitter.And Sinomeasure electromagnetic flow transmitter supports customized appearance color and surface stickers. Features Graphic display:128 * 64Output:Current (4-20 mA), pulse frequency, mode switch valueSerial communication: RS485