MIK-LUGB Vortex Type Flow Meter

Short Description:

A vortex flow meter is a type of flow meter used to measure the flow of liquids, gases, and steam in pipelines. It is based on the principle of measuring the frequency of vortices generated when a fluid flows around a bluff body. As the fluid passes the bluff body, it creates vortices that are shed alternately from either side of the body. These vortices are detected by a sensor and the frequency of the vortices is proportional to the flow velocity. Vortex flow meters are known for their high accuracy, low maintenance, and reliable performance. They are commonly used in industries such as chemical, petrochemical, food and beverage, and water treatment.


Product Detail

Product Tags

Introduction

LUGB Vortex Flowmeter is on the principle of Karman street, to measure liquid, gas, and vapor even turbid liquid including micro grain and impurity. Applications: petroleum, chemical industry, paper making, metallurgy, electric force, environmental protection, food industry and etc.

Product Highlights

  • Small pressure loss, wide range, high accuracy.
  • It is hardly affected by fluid density, pressure, temperature, and viscosity when measuring volume flow under working status.
  • No moving mechanical parts, thus high reliability and low maintenance. Instrument parameters can be stable for the long term.
  • Vortex flowmeter can be used in a temperature range of -40℃ ~ +400℃.
  • It has both analog standard signals and digital pulse signal output to match with computers and other digital systems.

Specification

Nominal Diameter (mm) 15, 20, 25, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300
Medium type Liquid, Gas, Steam (saturated steam,superheated steam)
Medium temperature (℃) -40~+260°C, -40~+300°C
Body material SS304
Allowed vibration
acceleration
Piezoelectric type: 0.2g;
Capacitance type: 1.0-2.0 g  
Accuracy Without compensation: DN15-DN25–1.5%,

DN32-DN200–1.0%,

DN250-DN300–1.5%;

With compensation: DN25-DN300–1.5%;

Turndown 1:6 to 1:25
Power Voltage Sensor: +12V DC, +24V DC;
transmitter: +12V DC, +24V DC;
Battery operated type: 3.6V battery(could be used for 2 years)
Output Pulse: high level≥6V, low level≤1V;
current: 4-20mA(Load resistance ≤300Ω)
Communication RS485 modbus or Hart(Customized)
Pressure loss factor Conforming to JB/T9249 standard Cd≤2.4
Protection Grade IP65
Ambient conditions Temp. -20℃ to 55℃ , relative humidity 5% to 90%,
atmospheric pressure 86 to 106 KPa
Applicable mediums
Transmission distance
Gas, liquid and steam
3 wire pulse output: ≤300m,
2 wire current output (4-20mA)≤1500m;
Load resistance≤500Ω; RS485 / HART≤ 1200m

  • Previous:
  • Next:

  • Write your message here and send it to us